Workshop Mate Workstation
TALK TO A GARAGE EXPERT
Not sure where to start with your garage setup? We’ve helped countless customers design smarter, more efficient garages and we can do the same for you. Contact us today and let’s map it out.
Workshop Mate 30 Ton Press with Spring Compressor
The Workshop Mate Workstation is a 30,000 kg H-frame hydraulic press that combines a heavy-duty shop press, side-mounted spring compressor and filter crusher into one compact workstation. Designed for trade workshops that need to work faster and safer, the workshop mate WSM4 turns difficult suspension and pressing jobs into controlled, repeatable processes.
How Does the Workshop Mate Press Improve Your Workflow?
The Workshop Mate press delivers up to 30 tons of controlled force, operated by a 10,000 psi air/hydraulic foot pump that lets you keep both hands on the job for accuracy and safety. With a working range of 224 to 819 mm, 140 mm main ram stroke and an 8-position adjustable bed, you can quickly set up for bearings, bushes, hubs, ball joints and general pressing jobs without constant reconfiguring. The winch-operated bed makes raising and lowering the work table simple, even with heavy fixtures in place.
Why Choose the Workshop Mate WSM4 for Suspension & Spring Work?
The side-mounted spring compressor on the Workshop Mate WSM4 is purpose built for under-car work and will handle most manufacturer springs up to 3,500 kg GVM, including tough 4x4 and passenger vehicle struts. Universal spring clamping and a comprehensive range of adaptors let you safely compress and rebuild struts that are often considered too hard or risky on standard equipment, helping you take on more profitable suspension work with confidence.
What Makes the Workshop Mate Workstation So Versatile?
This is not just a press. The Workshop Mate includes:
• A filter crushing assembly for draining and flattening oil filters before recycling
• A comprehensive high quality interlocking tool, die and spacer kit that locks together for safe, controlled pressing
• On-board tooling storage so dies, spacers and adaptors are always at your fingertips
Together, these features mean you can remove and install wheel bearings, bushes, gears, U-joints and pulleys, compress springs and crush filters from one dedicated workstation, reducing setup time and keeping your workflow organised.
Key Specs at a Glance
• Safe working capacity: 30,000 kg
• Working range: 224–819 mm
• Bed height: 8 settings at 85 mm increments
• Bed width: 466 mm with 200 mm bed gap
• Main ram stroke: 140 mm, 70 mm ram diameter
• Input pressure: 700 bar with 90–125 psi air supply
• Overall size: approx. 1820 H x 1170 W x 820 D mm, weight around 400 kg
Built for demanding professional workshops, the Workshop Mate Workstation gives you safer, faster and more profitable pressing and suspension capability in one well-engineered unit.
Features:
- Air/Hydraulic operated 30,000kg press
- Side mounted spring compressor
- Filter crushing assembly
- Dozens of unique tooling options
- On-board tooling storage stand
- Winch operation to lower and raise bench
Benefits:
- Press almost any bearing or bush with PRECISION and ACCURACY in minutes, saving valuable workshop time
- Smooth AIR/HYDRAULIC foot pedal operation for hands-free accuracy & control
- Hands free spring compression
- Even the most difficult pressing tasks become SAFE & EASY
- Complete with COMPREHENSIVE HIGH QUALITY interlocking Tool, Die and Spacer Kit to ensure SAFE WORK PRACTICES
- Complete on machine storage - minimises time spent searching for the required tools & spacers for each job!
- Tasks like SUSPENSION BUSHES once seen as too hard become a breeze
- A comprehensive variety of spring adaptors, suitable to almost any type of model of spring SAFE & EASY to compress in MINUTES
- Decrease labour time & increase productivity and efficiencies
- Increase Workplace Safety
- Undertake jobs that are currently too difficult
Note: ADDITIONAL TOOLING MAY BE REQUIRED FOR SOME APPLICATIONS
Specifications:
- Safe Working Capacity: 30,000kg
- Working Range: 224-819mm
- Piston Ram Stroke Main Ram: 140mm (Standard load cap fitted)
- Bed Height Settings: 85mm increments - 8 settings
- Bed Width: 466mm
- Bed Gap: 200mm
- Piston Ram Stroke: 295mm
- Main Ram Diameter: 70mm
- Input Pressure: 700 bar
- Operating Air Pressure: 90-125psi
- Recommended Hydraulic Oil For Maintenance: ISO32
- Overall Dimensions: 1820H x 1170W x 820Dmm
- Skid: 1020L x 1000W x 1600Hmm
- Weight: 400kg
Spring Compressor:
- Will do most (NOT ALL) manufacturer springs up to 3,500kg GVM
Downloads
